Double card exchange-CodePudding

PC1 have double card, the IP address of the corresponding to 192.168.1.100 and 192.168.1.101, operating system, for win10
PC2 for single card, IP address is 192.168.1.200,
Problems are as follows: through a cable connection after pc1 and pc2, can through the pc2 ping pc1 any card? If you can, how to configure?

CodePudding user response:

The

refer to the original poster guasong response:

PC1 have double card, the IP address of the corresponding to 192.168.1.100 and 192.168.1.101, operating system, for win10
PC2 for single card, IP address is 192.168.1.200,
Problems are as follows: through a cable connection after pc1 and pc2, can through the pc2 ping pc1 any card? If you can, how to configure?

Not allowed to use devices such as switches or routers,

CodePudding user response:

Can be achieved, the premise is two different network segment,

CodePudding user response:

refer to the second floor Gu Hao 2 reply:

, the premise is two different network segment,

You have said is pc1 and pc2 can not on a network segment, or pc1 two network CARDS on a network segment?

CodePudding user response:

First two CARDS not on a network segment, and then Ann soft routing software,

CodePudding user response:

reference guasong reply: 3/f

Quote: refer to the second floor Gu Hao 2 reply:
, the premise is two different network segment,

You have said is pc1 and pc2 can not on a network segment, or pc1 two network CARDS on a network segment?

PC1 card 1 and PC2 is the same network segment, the network card PC1 2 another network segment

CodePudding user response:

reference 5 floor Gu Hao 2 reply:

Quote: refer to the third floor guasong response:

Quote: refer to the second floor Gu Hao 2 reply:
, the premise is two different network segment,

You have said is pc1 and pc2 can not on a network segment, or pc1 two network CARDS on a network segment?

PC1 card 1 and PC2 is the same network segment, the network card PC1 2 another network segment

According to the 4th floor, it is configured to use soft routing software?

CodePudding user response:

refer to 6th floor guasong response:

Quote: refer to the 5 floor Gu Hao 2 reply:

Quote: reference guasong reply: 3/f

Quote: refer to the second floor Gu Hao 2 reply:
, the premise is two different network segment,

You have said is pc1 and pc2 can not on a network segment, or pc1 two network CARDS on a network segment?

PC1 card 1 and PC2 is the same network segment, the network card PC1 2 another network segment

According to the 4th floor, it is configured to use soft routing software?

Don't need any soft routing
PC1 card 1 to enable a network share, then automatically PC1 card 2 configuration to a network segment, and then the IP network Duan Gaicheng PC2 and PC1 card 2, the gateway is set to PC1 card 2 IP.
As for the two segment, can be set, including the use of the automatically assigned when sharing network segment,
Win10 seems to be the default Shared with another network card are available, and other network adapter is disabled, so can need not only enable the network adapter card 2, and 1
Method is like this, oneself go to try,

CodePudding user response:

refer to 7th floor Gu Hao 2 reply:

Quote: refer to 6th floor guasong response:

Quote: refer to the 5 floor Gu Hao 2 reply:

Quote: refer to the third floor guasong response:

Quote: refer to the second floor Gu Hao 2 reply:
, the premise is two different network segment,

You have said is pc1 and pc2 can not on a network segment, or pc1 two network CARDS on a network segment?

PC1 card 1 and PC2 is the same network segment, the network card PC1 2 another network segment

According to the 4th floor, it is configured to use soft routing software?

Don't need any soft routing
PC1 card 1 to enable a network share, then automatically PC1 card 2 configuration to a network segment, and then the IP network Duan Gaicheng PC2 and PC1 card 2, the gateway is set to PC1 card 2 IP.
As for the two segment, can be set, including the use of the automatically assigned when sharing network segment,
Win10 seems to be the default Shared with another network card are available, and other network adapter is disabled, so can need not only enable the network adapter card 2, and 1
Method is like this, try yourself,

Thank god! The