Pray god to help see the IP Settings work?
Company has two network, network 1, 2, the following are independent switches and routers, IP routers and PC computer Settings as follows,
When demand is a network fault, the company all share a PC network, then as long as the router on the main line to another network switches on the line,
My this plan? About 40 computer, not mobile phone, then divided into two routers process,
Pc1 set 192.168.2.45 255.255.0.0 192.168.0.1 net 1 set router 192.168.0.1 255.255.0.0

Pc3 set 192.168.0.45 255.255.0.0 192.168.0.1 network router set 2 192.168.0.1 255.255.0.0

CodePudding user response:

Not OK, two 192.168.0.1, IP conflict,

CodePudding user response:

Two network is independent, it is only a drop, to a network, with good access to the Internet, the network dropped back to normal, in to separate the two networks,

CodePudding user response:

No problem
The defects of the network is now PC1 and PC3 2 and 4 are separated, unable to visit each other, if this is acceptable, according to the figure in the painting directly pick up to go,

CodePudding user response:

Double outside access, want to make decision for the line
Or directly through a router, write floating route to do,
If money enough, you can buy a load balance device to do,
Without having to manually jump line switch,

CodePudding user response:

Can, it is recommended that the fiber after 1 PC using 0 section below half part, optical fiber 2 USES the first half, is a use of 0.120, with a 0.120, such can visits, also do not conflict, can actually buy a double WAN routers, with network equilibrium was solved

CodePudding user response:

No problem, as long as the client IP address is dynamic