是这么回事,公司业务需要,必须保证办公电脑能同时访问172.16.1.62内网服务器上的服务程序和10.77.236.211 144.1.16.202这两个远程服务器上的服务,公司所有门店都是通过租用电信的VPN内网来链接的,内网都是172.16.X.X的IP段,但是每个门店的网关不同,内网的172.16.1.62服务器是在其中一个门店,这个门店的网关是172.16.1.57,共有58~62 五个可用IP地址,我部署了一台双WAN口路由,2个WAN口分别设置了10.77.236.211和144.1.16.202,LAN口设置了172.16.1.60,从路由LAN口引了一根网线上交换机(非网管),同时把VPN内网专线接入交换机,然后再分别从交换机引了3根网线到PC1,PC2和服务器,分别设置了172.16.1.58 172.16.1.59 172.16.1.62的IP地址,这时2台PC和服务器ping两个远程服务器和路由的LAN口172.16.1.60地址都是通的,然后另外一个门店VPN网关172.16.0.1,其中一台PC分配了172.16.0.2的IP,我用这台PC去ping刚才那个门店的2台PC和服务器都是可以Ping通的,ping第一个门店的网关地址172.16.1.57也是通的,但是Ping路由的172.16.1.60怎么都ping不通,连不上路由自然也就连不上路由WAN口连接的2个远程服务器,到底是什么原因ping不通路由的LAN口地址呢? Routing has written in the static routing strategy, along mask 255.255.255.0 172.16.1.57, a novice, really can't think of any reason, please bosses to give directions
CodePudding user response:
A little not understand wan1 wan2 these two address is? Routing is the routing for network and wan zha you wrote it? Such a statement is a bit strangeCodePudding user response:
First of all, you didn't write a network segment, how many mask, another along mask 255.255.255.0 172.16.1.57, 24 mask, the next hop in another section, has a first route on a router, and your gateway 57 and didn't say understand in the set