CodePudding user response:
And I met before, I just copy and paste two methodsA: 1, left corner start menu, click on the computer click on the right side of the run option;
2, type CMD in the input box;
3, then input format h:/fs: FAT32, h: refers to the U disk in the drive;
4, open the control panel, click administrative tools, click computer management, enter the disk management;
5, find the place of U disk drive single point right, click delete disk partitions, click on the create a new disk partition;
6, according to the prompt completion of disk partitions formatted,
2
1, open the control panel, pipe, 5261 tools, computer management, storage, 4102, 1653, disk tube
2, right-click on the "disk 1", select "initialize disk", click "ok" directly,
3, after the initialization is complete, the state of the U disk into "online" status, pay attention to the U disk lock is open, otherwise it will appear the following prompt: "because the media is protected by writing, unable to complete required *,"
4, right-click on the right of the white box, select "new disk partition", enter the new disk partition wizard, click next directly, choose the partition type (primary disk partitions, extend the disk partition or logical drive), generally can choose primary disk partitions,
5, select the disk space capacity: generally USES the default size,
6, assigned a drive letter (or assign),
7, select "according to the following the format this disk partitions" set the format in the form of (file system type, allocation unit size, volume label) (don't have to choose the quick format),
8, the successful completion of the formatting the wizard, click the complete waiting for its format, format, after the completion of U disk status is displayed as "good", is nearly finished,