, look at the trouble, our company the whole building access switches, almost all have this kind of log, recent days found
Port frequent the up, down, in practical use, give me some feedback does have broken network
the condition of theSharp nimble, H3C switches are the log
Physical link I checked, there is really no problem, also can't be equipment problems
I was not recruit

CodePudding user response:

The log is belong to the agreement down, will be the port duplex??
If you have any questions can discuss privately: 2953364601

CodePudding user response:

This I have to manually configure a switch, duplex and speed, but there is still a problem, think back, in fact is unlikely, after all, all access switches have this kind of problem, I now suspect is the core of the problem, but do not know how to start

CodePudding user response:

The core has a log? Cascade core with trunk or access? Try speed auto duplex auto

CodePudding user response:

This can you look at the port of the specific configuration is configured with the edge of the port and external loop the loop under the fool switches or the possibility of more

CodePudding user response:

Under the joint switches to trunk with mouth

CodePudding user response:

references to early to bed and early to rise, 4/f, cardiac response:

this can you look at the port of the specific configuration is configured with the edge of the port and external loop the loop under the fool switches or the possibility of more

switches I configuration ring prevention strategy, if there is a loop, bottom allied mouth will automatically disconnect, and there is no loop log

CodePudding user response:

refer to 6th floor Naright response:

Quote: early to bed and early to rise to cardiac reference 4 floor response:

this can you look at the port of the specific configuration is configured with the edge of the port and external loop the loop under the fool switches or the possibility of more

switches I configuration ring prevention strategy, if there is a loop, bottom allied mouth will automatically disconnect, and there is no loop log

you that how much power switch below is whether meet to POE of ap may be a power supply with fixed is generally the loop will come off the multiple port port traffic or a GenBa a line to confirm what the problem

CodePudding user response:

Full duplex try adaptive rate, give it a try