A switch need to configure the two vlan, gathered one vlan inside make four ports connect to the server, and then two three layer routing between vlans let two vlan normal communication, is this possible? Configure port convergence is first to do routing between vlans or do port gathering
There are detailed steps is best, IBM data center switches, write a cisco's steps to also go, thank you

CodePudding user response:

First configuration gathering or configuration VLAN should not affect, according to your proposal, gather port to configure the VLAN configuration that is meet port mode and its VLAN, belonging to a VLAN is to exist,

CodePudding user response:

The ETH - TRUNK

CodePudding user response:

reference 1st floor weixin_40290083 response:

first configuration gathering or configuration VLAN should not affect, according to your proposal, gather port to configure the VLAN configuration that is meet port mode and its VLAN, belonging to a VLAN is to exist,

Thank you for your guidance, for one day or no progress

CodePudding user response:

Convergence and server connection, so the way of gathering requirements, cannot use the cisco proprietary protocol, under the specific you search again

CodePudding user response:

First gathered in the configuration vlan

CodePudding user response:

Do the aggregation, do vlan is added in aggregate interface mode,

CodePudding user response:

Routing and to do is direct, routing is equipment does not affect to vlanIP

CodePudding user response:

#
Interface Eth - Trunk1
The port link -type access
The port default vlan 10
#
Interface Ethernet0/0/1
The eth - trunk 1
#
Interface Ethernet0/.two survivors
The eth - trunk 1
#

CodePudding user response:

A look is experienced, the first to ensure the exchange pattern aggregation function