When I use the I2C read data ADS7924 reply ack is always kept lower release
But reading threshold setting and 00 h registers is that he is to release the
Hope to have used a master, thank you
This is can normal communication, but can't read in a row, otherwise may not release the ack
This is when the read data register does not release the ack
CodePudding user response:
After careful look at the instructions, there should be some configuration register, need to set up devices, to continue down the operation instructions, if not, the original poster can try three increases in bytes after the operation, 40 milliseconds of delay,CodePudding user response:
Work related registers are set according to the specification, delay also add lead, even if delay 1 s are still not releaseCodePudding user response:
As the first figure is put in wrongly, the reply properly is the ack