For bosses to help see what the problem is
Have you tried various ways to download is failed, spi mode all tried it again, also tried to use flash size, baud rate also tried

CodePudding user response:

Gpio0 gpio2 to conform to the requirements of the level of programming

CodePudding user response:

Burn it to try it, first, an official AT the firmware to see the AT command can be used, the arduino that see esp8266 didn't choose the right development board

CodePudding user response:

refer to the second floor RambOoO_l response:

Burn it to try it, first, an official AT the firmware to see the AT command can be used, the arduino that see esp8266 development board didn't choose the right

I try this weekend

CodePudding user response:

reference qq_26918203 reply: 3/f

Quote: refer to the second floor RambOoO_l response:

Burn it to try it, first, an official AT the firmware to see the AT command can be used, the arduino that see esp8266 development board didn't choose the right

This weekend I try

A serial port driver installed the words I feel should be no problem

CodePudding user response:

RambOoO_l

reference 4 floor response:

Quote: refer to the third floor qq_26918203 response:

Quote: refer to the second floor RambOoO_l response:

Burn it to try it, first, an official AT the firmware to see the AT command can be used, the arduino that see esp8266 development board didn't choose the right

This weekend I try

Serial port driver installed the words I feel should be no problem

Driver: sure, I buy again later to purchase a esp32 burning man is no problem

CodePudding user response:

There should be a pin when burning level configuration requirements