Have a VLAN multicast applications, the environment is: a layer 3 switches S5500, several PCS, as shown in figure of the connection, the requirements to PC1 sent group broadcast, PC2 can receive,

Three layer router, because there is no only by static configuration IGMP SNOOPING, ways to construct the

Switch configuration is as follows:
Igmp snooping -
The quit

Vlan 10
The port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/2
Igmp snooping - enable
The quit

Vlan 20
The port GigabitEthernet 1/0/3 to 4
GigabitEthernet 1/0/Igmp snooping - enable
The quit

Vlan 30
The port GigabitEthernet 1/0/5 to 6
GigabitEthernet 1/0/Igmp snooping - enable
The quit

Vlan 100
The port GigabitEthernet 1/0/7 to 8 GigabitEthernet 1/0/
Igmp snooping - enable
The quit

Multicast vlan - 100
Subvlan 10 20 30
The quit

Interface Gigabitethernet 1/0/2
Igmp snooping - static - group 239.1.1.10 vlan 10
The quit

Interface Gigabitethernet 1/0/8
Igmp snooping - static - the router - the port vlan 100
The quit


Question:
Eight mouth Gigabitethernet 1/0/send 239.1.1.10 group broadcast, in theory it should turn to Gigabitethernet 1/0/2
But in fact not,


Don't know what need to be configured, ask an expert to help solve,

CodePudding user response:

Good profound problems, top

CodePudding user response:

Jacking, no one encounter similar problems

CodePudding user response:

Seems to have set the routing

CodePudding user response:

The multicast to ensure that the two can exchange between VLAN, three layers, no routing, multicast tree is built up