Network from the ground floor to the third floor of the first floor of the wifi points out
CodePudding user response:
This has nothing to do with your transceiver, optical listen to what you say, the network structure is not very ideal, you have a computer room on the ground floor, why don't you have optical transceiver, from gathering out there... Isn't it is much more stable
CodePudding user response:
reference 1st floor QCJQTVB response: this has nothing to do with your transceiver, optical listen to what you say, the network structure is not very ideal, you have a computer room on the ground floor, why don't you have optical transceiver, from gathering out there... Isn't it is much more stable I am a small white light is not very know what you mean is directly connect the cat? CodePudding user response:
If your fiber problem CodePudding user response:
reference weixin_46456272 reply: 3/f if your fiber problem I think you the problem of transceiver CodePudding user response:
This to level 1 level check, look for laptop into your downstairs optical transceiver front-end ports on the plug together PING road, if you don't replace, recovery, to run upstairs into the optical transceiver front-end ports PING road by, if replace, can determine that you downstairs 1 to 3 this line problem, may be fiber, may also be a transceiver, can replace ruled out one by one, CodePudding user response:
Tried it should be the problem of transceiver is going to change a what brand of transceiver better? CodePudding user response:
reference 5 floor BabyDriverST reply: this check level 1 level, looking for a laptop into your downstairs optical transceiver front-end ports on the plug together PING road by, if not replace, recovery, to run upstairs into the optical transceiver front-end ports PING road by, if replace, can determine the time in you below 1 to 3 lines, may be a fiber, also may be transceiver, can replace ruled out one by one, try should be the problem of transceiver is going to change a what brand of transceiver better? CodePudding user response:
I often use hai kang, feel is good, anyway, some big brands, are not wrong, if there are conditions to get a small P, another, take a look at your light signal is good, if cable is bad, weak light CodePudding user response:
In a new transceiver, check the fiber loss again CodePudding user response:
refer to the eighth floor lcpweiwei response: I often use hai kang, feel is good, anyway, some big brands, are not wrong, if there are conditions to get a small P, another, take a look at your light signal is good, if cable is not good, due to weak light fiber line is just filled with early know using ordinary cable well save trouble CodePudding user response:
See first optical transceiver receive light under normal and not normal word from router, screening to the transceiver, where packet loss is what problem, CodePudding user response:
Was probably caused by a fiber loss, there may be part of the tail fiber bending the leads to the formation of a droop is too large and replace 
