Has been not on the network, which might be the problem,

CodePudding user response:

at the very least you give us a look at the local connection status and the status of the IP address,

CodePudding user response:

There is something wrong with the network adapter or cable? Can't see using USB network adapter

CodePudding user response:

It opens at the,,,, look at the IP Settings, this also don't see anything

CodePudding user response:

Check the IP Settings, to plug cable or ping gateway, brothers, you'd better set up and down figure and the network connection state, or you can't judge what's the problem

CodePudding user response:

Here's a picture, how see also don't see a problem, at the very least to watch a network connection state

CodePudding user response:

There is something wrong with the description, please explain in detail, to suit the remedy to the case!

CodePudding user response:

Drive crystal head

CodePudding user response:

Confirm the cable and the IP is the absence of problems reinstall TCP/IP protocol
Reinstall TCP/IP protocol
1) right-click on the network connection, and then click "properties",
2) click "install",
3) click the "agreement", then click "add",
4) click "from the disk to install",
5) type in C: \ Windows \ inf, find ipmidrv. J inf or nettcpip and then click "sure,"
6) in the list of available agreement, click on the "Internet protocol (TCP/IP)", then click "sure", select TCP/ipv4 protocol can be installed,

CodePudding user response:

See if cable crystal head has a problem, check the IP Settings, to plug cable or ping gateway, you'd better look at the network connection status, or you can't judge the problem

CodePudding user response:

You this situation, it is suggested that still find computer look at, because you like what all don't understand, this is obviously there is something wrong with the network and host connection, is an Internet connection, the second is the network card is broken, switch or router, or light cat not electricity, three is the cable broken