Have 2 iP section, respectively 10.207.7. XXX and 10.207.8. XXX
Now want to 10.207.8. XXX IP segment of the machine in disguise or make into 10.207.7.56, consult everybody, is there any way operation
The machine can only be connected to the 10.207.8. XXX iP segment, unable to connect 10.207.7. The XXX on a network segment

CodePudding user response:

Layer 3 switches, 2 layer connection 10.207.7. XXX network segment, 10.207.8. XXX network segment TRUNK mode

CodePudding user response:

Didn't understand what you want to ask questions? Machine can only be connected to the 10.207.8. XXX iP segment, unable to connect 10.207.7. The XXX on a network segment, very simple, the vlan is ok,

CodePudding user response:

Do NAT, the outside is 10.207.7.56, inside is 10.207.8 x, but specific what to do, also look at your topology,

CodePudding user response:

Thank you, I'm still a rookie, many also is not very understand, but thank you for your bosses enthusiastic help

CodePudding user response:

Hello, I'm in the BBS about the IP issue, because it is not a professional network, so some look not to understand, a brief introduction, we are a school LAN, foreign no public IP, by unified management of the education bureau, school internal several IP section, 10.207.7. * * * and 10.207.8. * * * at the moment there is a machine can't move, can only put 10.207.8. * * * on the Internet, but the bureau of education only give us open a 10.20.7.56 outside this particular IP can enter into government affairs nets, right now is to find a way to make this one 10.207.8. * * * segment of the IP address of the machine into 10.207.7.56, thereby, make the machine smoothly through outside the government net, want to give directions,

CodePudding user response:

refer to the second floor Iforgetmyid response:

didn't understand what you want to ask questions? Machine can only be connected to the 10.207.8. XXX iP segment, unable to connect 10.207.7. The XXX on a network segment, very simple, the vlan,

Hello, I'm in the BBS about the IP issue, because it is not a professional network, so some look not to understand, a brief introduction, we are a school LAN, foreign no public IP, by unified management of the education bureau, school internal several IP section, 10.207.7. * * * and 10.207.8. * * * at the moment there is a machine can't move, can only put 10.207.8. * * * on the Internet, but the bureau of education only give us open a 10.20.7.56 outside this particular IP can enter into government affairs nets, right now is to find a way to make this one 10.207.8. * * * segment of the IP address of the machine into 10.207.7.56, thereby, make the machine smoothly through outside the government net, want to give directions,

CodePudding user response:

This, need someone to go to your school to the nearest field look at the network topology, in order to know how to deal with,

CodePudding user response:

Thank you very much for the reply bosses give directions

CodePudding user response:

reference 5 floor weixin_44540224 reply:

hello, I'm in the BBS about the IP issue, because it is not a professional network, so some look not to understand, a brief introduction, we are a school LAN, foreign no public IP, by unified management of the education bureau, school internal several IP section, 10.207.7. * * * and 10.207.8. * * * at the moment there is a machine can't move, can only put 10.207.8. * * * on the Internet, but the bureau of education only give us open a 10.20.7.56 outside this particular IP can enter into government affairs nets, right now is to find a way to make this one 10.207.8. * * * segment of the IP address of the machine into 10.207.7.56, thereby, make the machine smoothly through outside the government net, want to give directions,

But you just put the computer into a 10.207.7.56 IP address, and then find this computer to connect switch, the switch to create 10.207.7 segment of vlan number, then the (attached to a port on the computer) get rid of vlan is certainly 10.207.8 segment before (vlan), then this part on the switch port release 207.7 vlan, linked switches corresponding port is also released a vlan is ok,

CodePudding user response:

So to understand the shuttle 10.207.7.56 interface could be accessed directly outside the government net right, on the IP configuration for this router 10.207.7.56 configure an acl permit 10.207.8. XXX network segment and precise point finally'd better write a deny any and then write a NAT group - the address 10.207.7.56 10.207.7.56 then configure 10.207.7.56 do a NAT outbound acl under the IP interface of serial number address - group, so that all the 8 segment address access 7 segment of NAT automatically into 7 IP network segment,

CodePudding user response:

references to the tenth floor l651506632 response:

so to understand the shuttle 10.207.7.56 interface could be accessed directly outside the government net right, on the IP configuration for this router 10.207.7.56 configure an acl permit 10.207.8. XXX network segment and precise point finally'd better write a deny any and then write a NAT group - the address 10.207.7.56 10.207.7.56 then configure 10.207.7.56 do a NAT outbound acl under the IP interface of serial number address - group, so that all the 8 segment address access 7 segment of NAT automatically into 7 IP network segment,

Specific operation can surf the Internet search pnat huawei router configuration I this is reference

CodePudding user response:

hot beard, 9/f, reference response:

Quote: refer to the fifth floor weixin_44540224 reply:

Hello, I'm in the BBS about the IP issue, because it is not a professional network, so some look not to understand, a brief introduction, we are a school LAN, foreign no public IP, by unified management of the education bureau, school internal several IP section, 10.207.7. * * * and 10.207.8. * * * at the moment there is a machine can't move, can only put 10.207.8. * * * on the Internet, but the bureau of education only give us open a 10.20.7.56 outside this particular IP can enter into government affairs nets, right now is to find a way to make this one 10.207.8. * * * segment of the IP address of the machine into 10.207.7.56, thereby, make the machine smoothly through outside the government net, want to give directions,

But you just put the computer into a 10.207.7.56 IP address, and then find this computer to connect switch, the switch to create 10.207.7 segment of vlan number, then the (attached to a port on the computer) get rid of vlan is certainly 10.207.8 segment before (vlan), then this part on the switch port release 207.7 vlan, linked switches corresponding port is also released a vlan,

Thank hot beard eldest brother patience, thank you

CodePudding user response:

references to the tenth floor l651506632 response:

so to understand the shuttle 10.207.7.56 interface could be accessed directly outside the government net right, on the IP configuration for this router 10.207.7.56 configure an acl permit 10.207.8. XXX network segment and precise point finally'd better write a deny any and then write a NAT group - the address 10.207.7.56 10.207.7.56 then configure 10.207.7.56 do a NAT outbound acl under the IP interface of serial number address - group, so that all the 8 segment address access 7 segment of NAT automatically into 7 IP network segment,

Thank the bosses provide such good ideas, thank you very much

CodePudding user response:

Technology higher-ups today very happy, thank you for your careful guidance, the network has been smoothly unicom, and smooth access to the specified network, once again thank you for your help,