Home > other >  Industrial-grade managed gigabit switches ERPS configuration instance
Industrial-grade managed gigabit switches ERPS configuration instance

Time:11-25

ERPS industrial-grade managed gigabit switches configuration, basically for ring configuration, tangent ring configuration and intersection ring configuration three conditions, combined with the actual application of topology, to share the specific configuration instance!

monocyclic configuration:


According to the above diagram, first of all, vlan configuration, all ring port vlan needs to allow agreement through, vlan configuration needless (follow-up can share alone), monocyclic configuration is as follows:
SW1 web configuration as shown in figure:


SW2 web configuration as shown in figure:


SW3 web configuration as shown in figure:

Monocyclic actually is only the connection between their respective time, consisting of a loop!

tangent ring configuration

According to the above diagram, first configuration VLAN, the corresponding port needs to allow the corresponding ring part of the agreement by VLAN, VLAN configuration needless (follow-up can share alone), tangent ring configuration is as follows:
SW1 web configuration as shown in figure:


SW2 web configuration as shown in figure:


SW3 web configuration as shown in figure:
Create ring 1:


Create a ring 2:


SW4 web configuration as shown in figure:


SW5 web configuration as shown in figure:

Tangent ring and ring configuration similar actually, mainly is the tangent point switch, to create two loop, so linked together!

intersection ring configuration

As the above diagram, the first configuration VLAN, the corresponding ring port needs to allow the corresponding VLAN by agreement, at the same time, the main ring ring, the ring port also need to allow son of VLAN by agreement, VLAN configuration needless (follow-up can share alone), intersection ring configuration is as follows:

SW1 web configuration as shown in figure;


SW2 web configuration as shown in figure;


SW3 web configuration as shown in figure;
Create the main ring 1:


Create a ring 2:


SW4 web configuration as shown in figure;
Create the main ring 1:


Create a ring 2:


SW5 web configuration as shown in figure;
Create a ring 2


SW6 web configuration as shown in figure;
Create a ring 2:


Intersection ring, mainly in the intersection point of the switch, to create the main ring and the ring, at the same time child ring network switches to form a complete set of ring, so clear, primary and secondary linked together!

CodePudding user response:

Not very understand, sounds very much like the

What is the purpose? Only make enterprise
  • Related