After ore body line interpretation in Micromine, need according to the interpretation line created orebody line box, but often orebody and shape is more complex, ore body line of interpretation also is mixed and disorderly, cable box is a little difficult (figure 1),
Figure 1
At this time can "turn off" the other orebodies interpretation line, box to choose don't want to show line, click on the "invisible button] (figure 2), leaving only a orebody interpretation of line, as shown in figure 3,
Figure 2
Figure 3
Click "create wireframes] button, connect orebody interpretation line in turn, as shown in figure 4,
Figure 4
Because wire frame for Micromine automatic connection, there must be some to be desired, we could have a human touch, click [triangle through line selection] (figure 5),
Figure 5
Like painting section, with a line through the modified triangle, as shown in figure 6, and then click [Delete] key on the keyboard, the triangle to be modified and deleted (figure 7),
Figure 6
Figure 7
Click on [] new line, establish a new connection between the two ore body interpretation lines, at this time, again connecting box, connecting place of triangle, will change (FIG. 8, 9)
Figure 8
Figure 9 contrast figure
Where there is no engineering control, it is necessary to do the orebodies extension, use measurement tools (figure 10), calculate the azimuth and dip Angle of the ore bodies, and record,
Figure 10
And then select the interpretation of the wire frame the periphery, and click [wire]/[editing tools]/[copy mobile line], pop-up [line translation] dialog box, select [azimuth Angle/distance] button, the azimuth and inclination to fill in, the distance between the length of the line, according to the actual situation, select the first [copy] button, adjust the size proportion determined by the actual, click [sure] (FIG. 11, 12),
Figure 11.
Figure 12
Repeat a few times more, make the transition to a more natural (figure 13), and then connecting box,
Figure 13