Units of the network come from engine switches to the various house network, are static IP address Settings, good computer Settings, wireless router WAN port or setting, just set the LAN port IP 192.168 X. 1 line, then fill in the static IP address to the Internet, but this connection problems, from wireless router LAN port to connect computers, computer IP and other room computer IP is not in a local area network (LAN), only in a wireless router in the local area network (LAN), use the printer or Shared is very troublesome,
So I want to ask if only the wireless router LAN how to set up the mouth, make wireless router switches function to connect the computer, keep all the computers in the same local area network (LAN), see a lot of strategy, to set up the LAN IP for the mouth 192.168.1. X, and should shut down the DHCP, but after shut down the DHCP, even the mobile wifi, only in a wifi connection interface advanced options manually fill in the IP to connect, and a lot of people don't know much about the unit, always can't let them connect the wifi time to manually set the IP,
Is there a way like insert the wireless router WAN mouth without setting, direct input can connect the WiFi password? Because the cell phone without the same local area network (LAN), as long as have network line, each house computer on the same LAN is OK!

CodePudding user response:

Wireless router with a LAN cable connection room switches, this scheme is feasible, the you are solved, the main DHCP on this problem, if the room has a DHCP server, or network devices provide DHCP service, so there is no problem, but there should be no see your description, so there are two kinds of solution, one is in room switches or DHCP server provided, another is not close the wireless router's DHCP service, pool is divided into several big address (how many wireless router is divided into many), each a small wireless router configuration address pool is ok,

CodePudding user response:

To realize your ideas with your current equipment doesn't work, or add equipment, either in equipment, from what you said, let the colleagues to buy their own portable wifi plugged into the computer is used,

CodePudding user response:

Wan mouth set static address, and wireless LAN DHCP is not to go, no matter the computer or printer is the same address of the DHCP pool, through the mouth of the three layers to wan static address

CodePudding user response:

reference bestkiller dawn reply: 3/f

wan mouth set static address, wireless LAN and mouth are DHCP not line, regardless of the computer or printer is the same address of the DHCP pool, through the wan port of static address three layers go

Is set up, but with the superior is not a local area network (LAN)

CodePudding user response:

This case is really no solution like

CodePudding user response:

1, the superior have DHCP, need not the router wan port
2, the superior no DHCP (superior equipment should be specified IP), without a router wan, open the router's DHCP, assigned to a network segment and the higher the designated IP in the same network segment

CodePudding user response:

refer to 6th floor m0_38017759 response:

1, superiors have DHCP, need not the router wan port
2, the superior no DHCP (superior equipment should be specified IP), without a router wan, open the router's DHCP, assigned to a network segment and the superior assigned IP in the same network segment

That there is a problem there is no way to determine whether router assigned address is now the network has been used