1, optimize the wireless sending and receiving interface, each wireless sending will generate the corresponding confirm soft interrupt a command, prevent chocked up with continuous send coordinator,
2, a serial port baud rate to 460800, a serial port with the command protection, type the command middle broken automatically abandoned, with 12 bytes of the frame interval between output commands,
3, optimize the AF launch speed, refer to my blog, AF send only 5% of the time is on the radio, the remaining 95% is in the FLASH of the AES keys, optimization is the time to check the FLASH, the whole AF sent from 12 ms reduce to 1 ms,
4, support coordinator white list function, for the protection of the equipment did not install code can through the way of synchronous database, to filter network access equipment,
5, the coordinator can store 200 net equipment link key, means that at least can access 200 nodes,
6, support all the ZDP command, convenient management network access equipment,
7, support to the third party equipment OTA, the premise is need to get the third party equipment to upgrade the firmware,
8, support Green Power Proxy,
Hardware factory LAUNCHXL corresponding TI - CC26X2R1 red development board, the independent modules are doing PCB, released in a few days,
The firmware program download address
https://download.csdn.net/download/zigbee_luo/12465149
Command document download address
https://download.csdn.net/download/zigbee_luo/12465112
CodePudding user response:
The firmware has been upload CSDN download center, is reviewing