Our company's network structure is like this, see figure, how to make A computer, the computer C, access to A computer, B I A small white just modify the address of the router?

CodePudding user response:

This depends on the type and configuration switches and routers, according to the figure, the computer B, C should be mutual visit, if you want to access A computer B, C, depends on the following two router model, if is the kind of small several routers, then it cannot be accessed,

CodePudding user response:

reference 1st floor Iforgetmyid response:

this depends on the type and configuration switches and routers, according to the figure, the computer B, C should be mutual visit, if you want to access A computer B, C, depends on the following two router model, if is the kind of small several routers, so will not be able to access,

switches is TP type plug and play, the router model is TP - WR886N, tried several ways that are not successful,

CodePudding user response:

refer to the second floor weixin_45417282 response:

Quote: refer to 1st floor Iforgetmyid response:

This depends on the type and configuration switches and routers, according to the figure, the computer B, C should be mutual visit, if you want to access A computer B, C, depends on the following two router model, if is that several small router, then you don't have access to,

switches is TP type plug and play, the router model is TP - WR886N, tried several ways that are not successful,

This topology of the routers can't realize your ideas, you can plug all cable LAN port, then turn off the router's DHCP (must), the wireless router as a wireless switch is used, so that you can achieve your ideas,

CodePudding user response:

Unified network segment

CodePudding user response:

As long as the routing table can access right, if you can't access in general because computer has pointed to the main road by A default gateway, and routing table and no access to computer B and C is routing is which passes through, so have access to the computer B or C on the packets to be sent to the main roads, and the main road by no routing table shows how the forwarding, creates no response, simple solution is to add static routing respectively on ABC, when that need access to the other party to send the packet to which router,

A computer
The route to the add - p xx. Xx. Xx. Xx (computer network segment of the BC) mask 255.255.255.0 yy. Yy. Yy. Yy (IP router Wan port B)

Computer BC
The route to the add - p zz. Zz. Zz. Zz (computer A segment) mask 255.255.255.0 yy. Yy. Yy. Yy1 (IP routers A Wan port)

CodePudding user response:

Really not line, all in a switch,

CodePudding user response:

Said the device, you do have address translation (NAT), to the internal network is protected, so unrealistic, when using A routing forwarding access computer B and C belong to the local area network (LAN), is very simple, but computer A and C is more troublesome, specific you see is how to access, Shared folder or printer sharing, you can try to do in the router port mapping and DMZ