Company now has two segments,
172.16.211. X
192.168.40. X
Provide two segments are higher level units, equipment are superior unit,
Not be set at the higher level units, under the condition of network segment 10.0.0. X, layer 3 switches on how to configure can realize network exchange of visits between 172 and 192 a network segment,

CodePudding user response:

Three VLANIF at layer 3 configuration, try to do routing between vlans

CodePudding user response:

Do NAT, can pass, but can not access the upper 10.0.0, X, if you want to exchange of visits between the both sides have to do the routing

CodePudding user response:

I have the same problem, with a...
Now I am also a local router, can share equipment, using policy routing respectively, using NAT, local can access to the company, but cannot exchange,
I'm thinking of the company network segment can be through the layer 3 switches after the local router out, seems to be not succeed..

CodePudding user response:

The 10.0.0. X address of gateway to layer 3 switches

CodePudding user response:

Key can now only in the local exchange of motor, the upper switch operation

CodePudding user response:

references don't want to talk on the second floor of the dumb response:

do NAT, can pass, but can not access the upper 10.0.0, X, if you want to exchange of visits, that both sides have to do routing

Now the upper switch must not to move

CodePudding user response:

Put a topology go up, or to say, in general you NAT and higher levels of Internet IP units can pass, but still want to see their side have the return route network segment

CodePudding user response:

refer to 6th floor a79656874 response:

Quote: refer to the second floor do not want to speak dumb reply:

do NAT, can pass, but can not access the upper 10.0.0, X, if you want to exchange of visits, that both sides have to do routing

Now the upper switch must not let move

If you just visit 10 period of individual machines, can do Dnat, 10 section mapping into the superior individual servers to your your IP, which let him direct access to the IP is ok,
Superior to the advice of access to all machine 10 segment or the two sides do routing,

CodePudding user response:

If you don't change the upper segment of the routing configuration, visits should not solve,