Node information
Corresponding node OID
Note
Equipment condition monitoring
CPU utilization
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5
Cassette equipment to obtain the size of the CPU utilization and memory utilization can also use another node HUAWEI DEVICE - MIB,
For V100R003 version using this node, please install V100R003SPH009 more patches,
CPU utilization: 1.3.6.1.4.1.2011.6.3.4.1.2
Memory size: 1.3.6.1.4.1.2011.6.3.5.1.1.2
(the two nodes are not recommended)
Involved in the MIB tables: HUAWEI - the ENTITY - among other - MIB
Memory utilization
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7
Memory size
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9
Equipment operation temperature
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11
Light module temperature
1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5
Light module voltage
1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6
Light module bias current
1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7
Light module to receive light power
1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8
Light module luminous power
1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9
The trap
1 equipment temperature alarm and alarm recovery:
1.3.6.1.4.1.2011.5.25.129.2.2.1
1.3.6.1.4.1.2011.5.25.129.2.2.2
2 storage capacity with alarm and recovery:
1.3.6.1.4.1.2011.5.25.129.2.6.1
1.3.6.1.4.1.2011.5.25.129.2.6.2
3 fan alarm and recovery:
1.3.6.1.4.1.2011.5.25.219.2.6.5
1.3.6.1.4.1.2011.5.25.219.2.6.6
4 power supply alarm and recovery:
1.3.6.1.4.1.2011.5.25.219.2.5.5
1.3.6.1.4.1.2011.5.25.219.2.5.6
The ENTITY - TRAP
Port traffic monitoring
Port traffic statistics
1.3.6.1.2.1.2.2.1, please refer to the manual MIB
This table includes port access port flow, unicast, group reporting statistics counting information, please see the MIB reference manual IF - MIB,
Temporary does not support VLANIF and TRUNK traffic statistics,
Port state of updown
1.3.6.1.2.1.2.2.1.8
-
The trap
The trap port bandwidth utilization:
The corresponding MIB node:
HwIfMonitorInputRateThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.9
HwIfMonitorOutputRateThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.113
CRC growing alarm trap: 1.3.6.1.4.1.2011.5.25.41.4.1 hwIfMonitorCRCErrorRising
Under the corresponding port can configure the parameters of the CRC
The trap - threshold error - statistics * * *
For S3300 & amp; 5300 or S3700 & amp; S5700 V100R005 and later versions, S9300 & amp; S7700 V100R003 and later to support the port utilization reaches the alarm threshold, the default bandwidth utilization rate of 100%, can be observed by setting the threshold value related to the alarm monitoring,
Command line mode of Settings: interface view
The trap - threshold {input to | the output to} bandwidth - in - use [resume - rateresume - threshold]
Warning the trap to the growth of CRC, cassette V100R005C01SPC100 and later versions support,
Involving the MIB table name: the IF - MIB
MAC vlans ARP monitoring
MAC address
1.3.6.1.2.1.17.4.3.1.1
Involving the MIB table name is: the BRIDEG - MIB, HUAWEI - ETHARP - MIB, HUAWEI - L2MAN - MIB
Dynamic query MAC
1.3.6.1.4.1.2011.5.25.42.2.1.3.1
Static MAC query
1.3.6.1.4.1.2011.5.25.42.2.1.2.1
Dynamic arp query
1.3.6.1.4.1.2011.5.25.123.1.17
Static arp query
1.3.6.1.4.1.2011.5.25.123.1.18.1
Business related monitoring
LLDP mib node visit
1.0.8802.1.1.2.1.4.1.1
LLDP mib node access use note:
Must have the command-line SNMP agent mib - the view that included iso - view iso
Relevant explanation: these two commands only allow to read the Internet node by default, to the as: iso (1). Org. (3) dod (6). The Internet (1) x others is not permitted to visit. But the LLDP mib oidis: iso (1) STD (0). Iso8802 (8802). Ieee802dot1 (1) ieee802dot1mibs (1) lldpMIB (2)
It does not include the LLDP mib oid, so we must use the command to include LLDP mib subtree.
- agent SNMP mib - the view that included iso - view iso
The state of the STP port
1.3.6.1.2.1.17.2.15.1.3
RRPP ring attribute table
1.3.6.1.4.1.2011.5.25.113.2.2.1.4
Master of Vrrp native state
1.3.6.1.2.1.68.1.3.1.3
Configuration save, more nodes with packaging for example
By related nodes automatically save the configuration
Steps: create an instance of 1, for example, the following two nodes with packaging:
1,1.3. 6.1.4.1.2011.6.10.1.2.4.1.2 this setting has a value of 1 (operation type 1, save the configuration file for the boot file),
2,1.3. 6.1.4.1.2011.6.10.1.2.4.1.9 this value is set to 4 (4: create the and go) before each create first remove existing instances (6: destory), pack the two nodes, you can through the network to complete the file save action
Involving the table name: HUAWEI - CONFIG - MAN - MIB
To detect whether there is data output OID:
Use the command snmpwalk - v the SNMP protocol version number - c community (community) host address OID (such as: snmpwalk - v 2 c - c public X.X.X.X 1.3.6.1.2.1.2.2.1), this command is to get all s5720 switch port traffic information, please visit the website of the specific parameters: http://www.net-snmp.org/docs/mibs/interfaces.html
Add or modify the cacti monitoring templates:
The most important thing is to modify the data template OID,
