Author: Halo
Time to write: 2021/5/2
1. Open the AI, new canvas, using tools [text] with copy, as the next step to make reference of the word, and then use the/rectangle tool draw a rectangle to define the width of the vertical stroke, then hold the [ALT] copy dragging a rectangle, effect as shown.
2, go to a step to use white arrows, select the rectangle at the top of the two anchors, to proceed to drag and drop, lower left side effects as shown.
3, continue to step on, to copy a rectangle, then use the mirror tool it turned about, and then use the white arrow will be stretched, effect as shown.
4, two copies vertical stroke to the bottom of vertical stroke to elongate;
5, the use of vertical stroke to make the right half, effect as shown.
6, using the same method, production forth words;
7, to copy a whole, then add strokes to font decoration, first of all to copy a horizontal stroke, the stroke aligned with two water half part, and then use the white arrow will stroke adjustment, effect as shown.
8, using the same method, add strokes to the lower part of the two water effect, effect as shown;
9, then the water will be two and a half part of the stroke decoration graphics copy, move, to the strike zone, effect as shown;
10, use white arrows were selected and click words in the top right anchor point on the vertical stroke to drag the above effect as shown.
11, go to a step to use white arrow selected blunt words under the vertical stroke of the lower left drag anchor point downwards, effect as shown.
12, will be the overall copy a move to lower part, continue to add broken pen to text layer effect, namely in the corner of the corner of the place to add a diamond, this design let the text more hardened by some;
13, the corner effect processing, the effect is as shown.
14, will be the overall copy a move to lower part, to add stripes adornment layer, effect as shown;
15, will be the overall copy a move to lower part, use/pen tool to dig holes in the font, prepare the way for the late effect, and then the whole copy a move to the right, select the overall, using lean tools will whole tilted to the right, the effect as shown.
16, will design a good font is copied to the PS, the layer named font;
17, press [CTRL + J] to copy a text layer, select the bottom of the text layer, use the pen tool respectively selected font of the blanks, convert constituency populated black, effect as shown;
18, in iron material, selected to copy the font copy the layer and press [CTRL key] + click view figure converts the layer selection, and then select the sizzling layer and press [CTRL + J] replicate a layer 1, effect as shown.
19, the selected font at the bottom of the layer to open layer style, choose color overlay set parameters, then rasterize layer styles, press [CTRL key] + click view figure converts the layer selection, then press [Alt] + down and move to the right to reproduce, make the font appeared thickness effect;
20, in the background material, will be the top layer 1 copy of two layer, select the top layer into districts, and then move to the lower left several pixels;
21, continue to step on the selected layer 1 copy the layer and press [] the delete key to delete, then converts the layer selection again, change the foreground, use the brush daub on the district;
22, go to a step to use the brush daub on the selection, effect as shown;
23, select the text layer, open the layer style respectively choose [layer style] and [projection] set parameters;
24, select the layer 1, open the hue/saturation, set parameters;
25, put into gear material, open/levels, set parameters;
26, go to a step to open the hue/saturation, set parameters, then use a black brush apply pressure around the gear dark, effect as shown.
27, use the same method, add gear material, to each hole effect as shown.
28, to create a new layer above the background layer to modify the foreground, use the brush to draw the shadow at the bottom of the font, effect as shown.
29, produce screw head graphics in AI, copying to PS, then use the method of adding iron effect to text, to the screw head to add graphics effect, and then open the [layer style], cant and relief parameters Settings;
30, go to a step to set the parameters of a projection;
31, in Mars, adjust to the appropriate size and location, effect as shown.
32, sealing layer and create a hue/saturation layer, create clipping mask, set the parameters;
33, the final effect as shown,
Do not spray to new, please advice, a great god,