Now there are two factories, as shown in figure, through the way of the fiber both sides exchanged


Routers are double WAN mouth, insert fiber respectively in each router WAN, IP respectively set to

192.168.3.1 (left) and 192.168.3.2 (right), and then respectively do static routing

Such as on the left side on a router IP route 192.168.1.0 255.255.255.0 192.168.3.1

On the right IP route on a router 192.168.0.0 255.255.255.0 192.168.3.2

It can realize both sides each other not????? I have a question the solution???

CodePudding user response:

Why nobody answer?

CodePudding user response:

Don't know, but I and know a VPN can certainly pass, since that is fixed on the right IP, the VPN server can stand on the right side on a router,

CodePudding user response:

Itself not far distance on both sides, the VPN access too slow,

CodePudding user response:

Should have no problem,

CodePudding user response:

There is a problem, this structure can't NAT, routing, but you again with particular emphasis on the WAN and LAN mouth mouth, so you may received the NAT outside so,
If you know how to confirm the NAT mode or routing mode there will be no problem, just close the NAT, worry a bit is on the LAN port on a new period of Internet,

CodePudding user response:

Should be no problem, can be achieved

CodePudding user response:

CodePudding user response:

Can, in theory, the router can see routing table have routing, and routing, the next article, basic can be done,

CodePudding user response:

Can find a VPN link, if the distance is nearly not need VPN with direct connection, the transit equipment needs with routing function (if the device is routing functions can be directly on the original equipment)

CodePudding user response:

Dandelion routing plausible

CodePudding user response:

In theory and not let from 1 to 0 section data of NAT translation and then add static routes can normal visit

CodePudding user response:

With routing can pass, see your static routing, dynamic learning or routing is right,

CodePudding user response:

The

reference 4 floor cust0811 reply:

[align=center] [b] [color=# 000000] [size=16 px] hello!

Through your description, I am here to simulate the environment, can realize, don't know what are the requirements for access to the network or planning? Can be added to the group to discuss

[/align]

What is this software

CodePudding user response:

Possible, Intranet is to visit the network routing and NAT, if it is to 0 segment to one segment is walking by the table directly, the default route to the outside web address directly to NAT

CodePudding user response:

Then you can communication??

CodePudding user response:

Have double WAN mouth with a router

CodePudding user response:

You set is static routing, theory should be able to connect, but it is best to use dynamic routing function (RIP, OSPF)