[vlan102] port gi 3/0/2
To add the port (s) to a VLAN.

Who met this problem

CodePudding user response:

dingdingding

CodePudding user response:

 int g3/.two survivors 
Dis this 

Look at what is

CodePudding user response:

GigabitEthernet3/.two survivors dis this
#
Interface GigabitEthernet3/.two survivors
#
return

CodePudding user response:

 int g3/.two survivors 
The port link -type access 
The port def vlan 102 

CodePudding user response:

On a business trip for several days, and tried not yet under the
3/0 GigabitEthernet3/.two survivors disp Intel gi/2
GigabitEthernet3/.two survivors current state: DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, the Hardware address is XXXX - XXXX - 2616
The Maximum Transmit Unit is 9216
Media type is twisted pair, loopback not set
The Port hardware type is 1000 _base_t
Unknown - speed mode, Unknown - duplex mode
The Link speed type is autonegotiation, Link duplex type is autonegotiation
The Flow - the control is not enabled
The Maximum Frame Length is 0
Broadcast MAX - 100% thewire:
Allow jumbo frame to pass
PVID: 1
Mdi type: auto
The Port link - type: access
Tagged VLAN ID: none
Untagged VLAN ID: 1

GigabitEthernet3/.two survivors port access vlan 102
GigabitEthernet3/.two survivors

GigabitEthernet3/.two survivors disp vlan 102
VLAN ID: 102
VLAN Type: the static
The Route Interface: configured
IP Address: XXX, XXX, XXX. 5
Subnet configures Mask: 255.255.255.0
Description: a VLAN 0102
Broadcast MAX - 100% thewire:
Tagged Ports: none
Untagged Ports: none