Line a head to switch, a pull out on the floor, influential to switch for a long time? Exchange chance to bad?

CodePudding user response:

Generally do not have what problem, because transformer isolation switches have an internal network, but it is not good, the method such as encounter what high voltage or drag,

CodePudding user response:

You this question cow bye! The switch didn't influence, of course! As for the other side to say , not the line directly to the end of a plate with!

CodePudding user response:

Put for a long time, damp mildewy, is influential,

CodePudding user response:

Will not affect, but moisture rust or necessary,

CodePudding user response:

As long as no high voltage to the general no problem on the Internet, the floor have electrostatic another calculate,,,,,,,,

CodePudding user response:

The biggest problem is that you are too lazy, not unplug switches on one end

CodePudding user response:

Small static will not affect the switch, monitor the hard sell

CodePudding user response:

If it's not can put the cable tray up, away from the high voltage, or remove unused ports on a switch, if you have your cable mark, usually has no effect on the switch,

CodePudding user response:

A head can be pulled out, but the original poster questions, ask the implication that it must be someone looking for a reason

CodePudding user response:

There will be no impact, as long as the cable head don't flooded, dry clean, no damage is no problem

CodePudding user response:

Direct pull not line?