Problem is to set up or router?
Light cat for the first routing
300 m for the first 2 by

CodePudding user response:

No results, seek

CodePudding user response:

The topology application architecture, unstable factor a lot!
1: first of all to guarantee the quality of the wired LAN, at the same time, have you considered it the length of the
2: the first floor and second floor room a lot? There is no need to hang so many wireless devices,
3: you are the 150 m and 450 m is the AP (cable section is the switch)

Plan A, 1/f, if go on like this link: it is recommended that A room with A managed switch
Scheme 2, all wireless directly, on the first floor and second floor adopts the wireless bridge method

The stability of the network decided factor are many, you have to screen is wired or wireless to cause, to suit the remedy to the case

CodePudding user response:

I also almost, often broken network

CodePudding user response:

The second floor of c room routing wan port

CodePudding user response:

You should be the problem of router Settings, I will pick up 4 under the same router routing, but to the following address of the router WAN is fixed, the gateway in the IP address of the first router, if routing is downward series WAN set: 1 don't move set 192.168.1.1, secondary WAN to 192.168.2.1 gateway is 192.168.1.1, level 3 WAN to 192.168.3.1 gateway is 192.168.2.1 by analogy,